Newtec MDM6000 - Import a Configuration

Newtec Proprietary
Confidentiality: Unrestricted
V1.0
100/314
General Device Settings and Actions MDM6000 Satellite Modem
12.3.5 Import a Configuration
Import a configuration file that can be used as a new configuration.
» Navigate to the Tasks Pane to check the available configurations;
» Click Device;
» Click Configurations;
» Click Import;
» Browse to the correct folder and select the correct config.xml file.
Please note that after an import of a configuration, the configuration is not loaded automatically.
This requires an additional load step, refer to LoadaConfigurationonpage101.
The configuration file must comply with the available configuration options and
activated licences on the device.