Newtec Proprietary
Confidentiality: Unrestricted
V1.0
252/314
Feature Descriptions MDM6000 Satellite Modem
14.12.2 BBF Decapsulation
14.12.2.1 BBF Decapsulation ISIs
Define the settings to filter out the required channels.
Parameter Description
Name Indicate the ISI that you want to decapsulate.
Verify the used channel name on the sending site.
Enable Activate the decapsulation of the ISI.
ISI Enter the ISI value that you want to filter out. This must correspond to the
ISI value defined on the sending site. (In this case on the remote site).
Demod ID This is the default ID.
Protocol Here you have the possibility to overrule the default protocol that has been
selected under the general decapsulation settings. Refer to
DecapsulationGeneralSettingsonpage251.
To Next Page
Loading...
