EasyManua.ls Logo

Newtec MDM6000 - Wideband; Clean Channel Technology

Newtec MDM6000
325 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Newtec Proprietary
Confidentiality: Unrestricted
V1.0
285/314
Appendix - Overview of the Used Technologies MDM6000 Satellite Modem
16.3 Wideband
The MDM6000 supports baudrates from 1Mbaud up to 72Mbaud. It also supports bidirectional
transmission up to 2 times 375Mbps, or an unprecedented total bitrate of 750Mbps.
16.4 Clean Channel Technology™
Clean Channel Technology™ is a combination of improved roll-off factors for DVB-S2 and advanced
filtering technologies to allow optimal carrier spacing. The combination can bring efficiency gains up
to 15%.
Clean channel technology consists out of the following three effects.
A first effect in the Clean Channel Technology™ is applying a smaller Roll-Off (RO) percentage than
currently used in the DVB-S2 standard. In the DVB-S2 standard the 20% and 25% Roll-Off factor
percentages are common. Basically this means that these percentages need to be added to the
desired bandwidth over satellite. Reducing these Roll-Off factors to 5%, 10% or 15% results in a
direct gain in bandwidth. This is reflected in the following formula:
Occupied bandwidth = Symbol Rate*(1+Roll-Off factor). The following figure compares 20% roll-off
with 5% roll-off.

Table of Contents

Other manuals for Newtec MDM6000

Related product manuals