Newtec MDM6000 - Demodulator

Newtec Proprietary
Confidentiality: Unrestricted
V1.0
176/314
Feature Descriptions MDM6000 Satellite Modem
14.6 Demodulator
The demodulator functional block is used to perform the demodulation of the incoming RF signal
(L-band or IF-band).
Depending on the device configuration the following modes are available:
• DVB-S2 (only, option DH-01)).
• DVB-S2, DVB-S2X and S2 Extensions (option DH-02)
Please refer to the section Optionsonpage10.
Also refer to the section DeviceIdentificationonpage107 to get an overview of the options that are
installed on the device.
MDM6000 >> Demodulator