Newtec MDM6000 - Standby Redundancy State

Newtec Proprietary
Confidentiality: Unrestricted
V1.0
160/314
Feature Descriptions MDM6000 Satellite Modem
14.1.13 Standby Redundancy State
USS has no control over the connectors on the Modem
(Transmit state, interface state).
The standby redundancy state allows you to overrule the initial device redundancy state.
With this parameter it is possible to reduce the switching delay.
For more information on the initial device redundancy state and where to configure it please refer to
section: DeviceRedundancyonpage217.
The following figures show the principle.