EasyManua.ls Logo

Newtec MDM6000 - Ethernet Interface Alarms

Newtec MDM6000
325 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Newtec Proprietary
Confidentiality: Unrestricted
V1.0
273/314
Appendix - Alarm List MDM6000 Satellite Modem
15.2 Ethernet Interface Alarms
Alarm Description
Eth Data Link Failure This alarm is raised when there is no signal on the
corresponding Ethernet interface.
Eth Data Itf Failure This alarm is raised when a failure is detected on the
Ethernet interface.
Eth Mgmt Link Failure This alarm is raised when there is no signal on the
corresponding Ethernet interface.
Eth Mgmt Itf Failure This alarm is raised when a failure is detected on the
Ethernet interface.
Eth Mgmt Fp Link Failure This alarm is raised when there is no signal on the
corresponding Ethernet interface. (Front Panel)
Eth Data Half Duplex This alarm is raised when an Ethernet interface is in half
duplex mode as a result of a link negotiation.
The alarm is not raised when the Ethernet interface was
forced in half duplex mode by configuration on the device.

Table of Contents

Other manuals for Newtec MDM6000

Related product manuals