Newtec MDM6000 - Configure the Pids Decapsulation

Newtec Proprietary
Confidentiality: Unrestricted
V1.0
255/314
Feature Descriptions MDM6000 Satellite Modem
14.12.3.2 Configure the PIDs Decapsulation
Parameter Description
Name Enter a logical name for the first PIDs decapsulator.
Enable Enable the PID decapsulator.
PID Enter the PID (Program Identifier) you want to decapsulate.
This must correspond with the PID value that has been configured on the Hub
site.
ISI Select one of the available ISI decapsulator names.
The PID you want to filter out must exist on this decapsulator.
Protocol Here you have the possibility to overrule the default protocol that has been
selected under the general decapsulation settings. Refer to
DecapsulationGeneralSettingsonpage251.