Newtec MDM6000 - General Encapsulation Settings

Newtec Proprietary
Confidentiality: Unrestricted
V1.0
223/314
Feature Descriptions MDM6000 Satellite Modem
14.11.1 General Encapsulation Settings
Navigate to the following location to configure the General Encapsulation settings. With general
settings we mean that these settings apply to both encapsulation protocol types (TS and BBF).
MDM6000 Satellite Modem >> Encapsulation
Enable this functional block to perform GSE or XPE encapsulation on the incoming IP data.
Select the appropriate forwarding mode: Layer 2 or Layer 3.