EasyManua.ls Logo

Newtec MDM6000 - Page 234

Newtec MDM6000
325 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Newtec Proprietary
Confidentiality: Unrestricted
V1.0
224/314
Feature Descriptions MDM6000 Satellite Modem
The MDM6000 supports two forwarding modes:
1. Layer 2 Forwarding Mode:
As Layer 2 Ethernet bridge, the MDM6000 transparently forwards any Layer 3 protocol, MPLS or
VLAN tagged traffic. Consequently it can be considered to act as an Ethernet cable over satellite.
However, operating as Layer2 Ethernet bridge creates extra overhead. Connected network
segments act as one broadcast domain, which can generate some traffic overhead on the satellite
link as well (e.g. ARP requests being sent over the satellite link).
Also note that the MDM6000 operates in promiscuous mode, meaning that it will forward any
incoming packet over the satellite link (for example ARP requests from host A to B while A and B are
on the same LAN segment)
But classification rules can be defined to limit this (excessive) traffic overhead.

Table of Contents

Other manuals for Newtec MDM6000

Related product manuals