Newtec Proprietary
Confidentiality: Unrestricted
V1.0
70/314
How to Manage the Device MDM6000 Satellite Modem
11.6.5 Using the USB Port
It is possible to perform a software upgrade, to import a device configuration file or import a license
file.
Log in as expert user to import a license file.
For a software upgrade proceed as follows:
» Insert a USB stick (carrying a installer.bin) into the USB port;
» On the Frontpanel navigate to Actions;
» Click OK (to unfold the branch);
» Navigate to Device Configuration Import;
(The following actions are possible)
– Device Configuration Import;
– Device Software Upgrade.
» Select Device Software Upgrade;
» Select File Name: The available upgrade files are displayed;
» Click OK;
» Select Reboot to complete the software upgrade.
(Processing is displayed and then the device is rebooted).
Use the same procedure to perform a
• configuration import, in this case select .xml instead of the installer.bin file.
• license file import, in this case select .ini instead of the installer .bin file.
To Next Page
Loading...
