Newtec MDM6000 - BBF over IP Alarms

Newtec Proprietary
Confidentiality: Unrestricted
V1.0
274/314
Appendix - Alarm List MDM6000 Satellite Modem
15.3 BBF over IP Alarms
Alarm Description
BBF over IP General This alarm is raised when there is a general BBF over IP Input
alarm.
This alarm is triggered by one of the following alarms.
• BBF over IP No Input Data
• BBF over IP Buffer Overflow
• BBF over IP Discontinuity alarm
• BBF over IP MODCOD Not Supported
BBF over IP No Input Data This alarm is raised when no input data is received between a
one second time interval for one or more BBF streams.
BBF over IP Buffer Overflow This alarm is raised when the input data buffer for 1 or more
BBF streams is full.
BBF over IP Discontinuity
alarm
The alarm is raised when the sequence numbers are not
continuous for a specific ntS2BBF input stream for five sec.
BBF over IP MODCOD Not
Supported
This alarm is raised when Baseband frames are dropped due
to receiving a non licensed MODCOD.