Newtec MDM6000 - DVB Carrier Identification; Device Unique ID; Device Variable Parameters

Newtec Proprietary
Confidentiality: Unrestricted
V1.0
169/314
Feature Descriptions MDM6000 Satellite Modem
14.2 DVB Carrier Identification
MDM6000 >> Modulator >> DVB Carrier Identification
The DVB carrier identification standard is used to reduce RFI (Radio Frequency Interference). The
DVB carrier identification allows the satellite operators to identify and contact the source of
interference quickly.
The DVB carrier identification exists of a device unique parameter and device variable parameters.
14.2.1 Device Unique ID
The Global Unique ID is a device unique identifier that is based on the MAC address of the
modulator.
14.2.2 Device Variable Parameters
The device variable parameters can be adjusted by the operator.
The geo coordinates indicates the current position of the modulator.
When "Use Geo Coordinates" is turned On, the latitude and longitude information is added to
carrier ID.
The telephone number makes it easier for satellite operators to contact you in case of emergency. It
is possible to enter the extension number of the department or person that is responsible for the
system configuration.
For example: +323 780 65 00 ext. xxxx. (With xxxx the correct extension number.)
Be aware that ext. is case sensitive.
The user data can be used to enter free text, it is possible to enter up to 24 characters.
For example: Enter the name of the company that is responsible for the uplink.
DVB-CID Format: At this moment only one format exists and by default the parameter setting is 1.