Newtec Proprietary
Confidentiality: Unrestricted
V1.0
106/314
General Device Settings and Actions MDM6000 Satellite Modem
The following window opens:
» Browse to the folder where the "installer.bin file" is stored;
» Select the file and click Open.
The following message is displayed:
Software Upgrade:
This operation will reboot your device!
Are you sure, you want to upgrade the device firmware with the content of
"installer.bin"?
» Click Upgrade.
Refresh the browser after about 40 seconds.
To perform a software upgrade using the CLI please refer to
section:SoftwareUpgrade(CLI)onpage85 .