Newtec MDM6000 - Page 157

Newtec Proprietary
Confidentiality: Unrestricted
V1.0
147/314
Data Interfaces MDM6000 Satellite Modem
Monitoring
Parameter
Description
Input Bit Rate The incoming bit rate in Mbps measured per stream.
Source Info This monitoring parameter provides the actual used input source IP Address
and UDP port.
Input Counter Displays the amount of incoming BBFs.
Output
Counter
Displays the amount of outgoing BBFs.
Output Bytes Displays the number of BBF bytes properly transmitted in a stream.
Drop Counter Displays the amount of BBFs dropped because the received modulation type
is not active on the source.
Invalid Frames Displays the amount of Invalid frames.
Overflow
Counter
Number of BBFs that are dropped for a specific BBF stream because the
input data buffer is full.
Discontinuity
Count
When the sequence numbers are not continuous for a certain BBF stream
this counter will be incremented.
ModCods not
supported
Displays the amount of BBFs that are dropped because the received
ModCod is not licensed for a specified BBF stream.