Newtec Proprietary
Confidentiality: Unrestricted
V1.0
212/314
Feature Descriptions MDM6000 Satellite Modem
MDM6000 > AUPC Client
The following table describes the configuration table, use it to activate or deactivate the AUPC
client:
Parameter Value Description
Configuration .
Index 1 This is the ID of your demodulator.
Note, the tables are foreseen to be able to
handle multiple demodulators in one
device (in case of HUB6000). In case of
the MDM6000 the index is always 1.
Enable On/Off Activate or deactivate the AUPC client. When activated
the client generates AUPC messages that are
transmitted to the controller.
To Next Page
Loading...
