Newtec MDM6000 - Page 84

Newtec Proprietary
Confidentiality: Unrestricted
V1.0
74/314
How to Manage the Device MDM6000 Satellite Modem
Craft Interface
To access the CLI via the craft interface do the following:
» Configure the line settings of the serial port as follows:
• Speed 115200 baud;
• Eight data bits;
• No parity bit;
• One stop bit.
» Make a connection between the managing device and the MDM6000 Satellite Modem.
For more information please refer to section: CraftInterfaceonpage25 .