129
Available settings for scan-to-file jobs
'Mirror' Use this setting to create a mirrored image of an
original. Mirroring occurs in the transport direction.
(The image is mirrored along the vertical axis.)
[75]
'Lighter/darker' Use this setting to define the exposure of the original.
Negative values mean less exposure and darker
scanned output. Positive values mean more exposure
and greyer scanned output.
[76]
Note: This setting can only be set if the
colour mode you select is grey or black and
white.
'Checkprint' Use this setting to define if the system prints a
checkprint for a scan-to-file job. The checkprint
represents the quality of the scanned document.
[77]
Note: This setting can not be used for
scan-to-file jobs with colour.
Setting Description
To Next Page
Loading...
