Oce TDS700 - Control your licenses with Océ License Logic

281
Log on to Océ License Logic
Control your licenses with Océ License
Logic
Log on to Océ License Logic
Introduction
You can run Océ License Logic on the controller of the Océ system or remote
through a web browser. Access to Océ License Logic is password protected. Use the
same network administrator password as you use on the Océ system to log on.
Purpose
Log on to Océ License Logic for the following purposes.
■ View the current active licenses
■ Get the host id of the Océ system
■ Save the current active licenses
■ Perform a license activation job.
You can activate new licenses or saved licenses.
Before you begin
To run Océ License Logic remote, you need the host name or IP address of the Océ
system.
How to log on to Océ License Logic on the Océ TDS700 Power Logic
®
controller
1. Open the Océ TDS700 Power Logic
®
controller application.
2. Click 'Edit' in the menu bar.
3. Click 'Licenses...'.
The logon window opens.
4. Select system administrator.
5. Enter the 'Password'.
6. Click the 'Logon' button.