205
Destination
Destination
Introduction
You can store your scanned file either in the temporary store on the controller or on
a network destination. You can define up to ten destinations in the Power Logic
®
controller application. On the scanner operator panel you can choose one of these
destinations. The destination can be a local destination, this means that the files are
stored on the Power Logic
®
controller. The destination can also be a remote
destination, this means that you can send scanned files to a workstation that is
connected to the same network as the printer.
Select a scan destination
1. Press the function key to select destination 1 until 4.
2. To select destination four till ten, initially you have the select destination four. Press
the arrow keys to select destination 4 until 10.
Note: The names of the destinations can be any. However, for your convenience, you
are able to define understandable names in the Power Logic
®
controller application.
To Next Page
Loading...
