308 Chapter 9 The finishing options
Maximum folding length
Maximum folding length
Introduction
There are maximum values for different kinds of media. The table below shows the
maximum values for three types of media and the possible folding methods.
Maximum folding settings for long prints
[60]
Folding settings 75 grams
[61]
Paper density
(g/m
2
) -->
60 75 110
Fold methods
First fold output
1 fold (mm / inch)
1220 / 48 6000 / 236 2500 / 98
Stacker 2nd fold
2 folds (mm / inch)
1220 / 48 2500 / 98 1220 / 48
Stacker 2nd fold
3 folds (mm / inch)
1220 / 48 2000 / 79 not possible
Belt 2nd fold
2 folds (mm / inch)
1220 / 48 1220 / 48 1220 / 48
Output
selection
Output length Delivery
‘Stacker’ or
‘Belt’
< 2.5 m Delivered on stacker or belt
‘Stacker’ or
‘Belt’
2.5 m - 6 m First fold only, delivered in first fold
delivery
‘Stacker’ or
‘Belt’
> 6 m length known at start Unfolded,
delivered in IRT
‘Stacker’ or
‘Belt’
> 6 m length not known at start Possible paper
jam
'First fold
only'
< 6 m Delivered in first fold delivery
To Next Page
Loading...
