Oce TDS700 - View the Job Properties of Jobs in the Scheduled Jobs

78 Chapter 2 Use the Océ TDS700 to print a job
View the job properties of jobs in the 'Scheduled jobs'
View the job properties of jobs in the 'Scheduled jobs'
Introduction
The 'Scheduled jobs' area contains print jobs and copy jobs. Print job properties are
defined with the printer driver or the job submission software. Copy job properties
are defined on the user interface panel of the Océ TDS700 scanner. As long as the
jobs in the 'Scheduled jobs' are not active jobs (jobs ready to be printed), you can
view the job properties.
Purpose
View the properties of a copy or print job in the 'Scheduled jobs'.
Before you begin
Make sure you have sufficient permissions when you log on to the Océ TDS700
Power Logic
®
controller application.
■ 'Anonymous' - no permission, only viewing access
■ Repro operator - permission, editing and other actions are allowed
■ Key operator - permission, editing and other actions are allowed
■ System administrator - no permission, only viewing access
How to view job properties in the 'Scheduled jobs'
1. Click 'Print jobs' in the vertical icon toolbar to access the 'Scheduled jobs'.
2. Select the job you want to view. You can only view one job at a time.
3. Click 'Properties' to access a secondary window where you can see the job
properties.
4. Click OK to close the window.