50 Chapter 2 Use the Océ TDS700 to print a job
Select a language
Off-line settings
Select a language
Introduction
On the operator panel of the Océ TDS700 printer you can specify which language
you want to use to display printer information, such as status and error messages. By
default, you can choose between two languages defined in the Océ TDS700 Power
Logic
®
controller application.
Select a language
1. Press the On-line key on the printer operator panel to put the printer off-line. The
message Off-line is displayed in the status window.
2. Press the left selection key to shift the focus to the Language option. A shadow
effect is used to indicate that the focus is set to this option.
3. Activate the Language option by pressing the right selection key. The dotted line
around the current selection is changed into an uninterrupted line and the small
selection triangles next to the specified language are no longer dimmed.
4. Use the Up / down keys to switch between the predefined languages.
5. The language specific elements on the display are immediately customized to reflect
your language choice. Only the indicator for the language itself, is in the alternative
language. This way you always know what your alternative language is.
6. Put the printer on-line again by pressing the on-line key. The printer now uses the
selected language.
To Next Page
Loading...
