170 Chapter 4 Use the Océ TDS700 productive scanner
The scanner operator panel
The scanner operator panel
Introduction
The Océ TDS700 is a very user-friendly system. The scanner, in particular, is very
easy to operate. Basic copy jobs can be performed by simply pressing the green start
key on the scanner operator panel. Only if you want to perform more complex copy
jobs, you have to change the default copy settings with the help of the other settings
on the scanner operator panel.
This section consists of two parts. The first part explains the basic use of the keys.
The second part deals with special use of the display. It describes how to use the soft
keys above and along the sides of the display to define your copy settings.
The scanner operator panel
The operator panel is located above the original feed. As you can see in the
illustration below, the panel consists of a display in the centre surrounded by a
number of function, section and arrow keys. To the left of the display, you can find
the Stop key and below the display you can find the Start, Numeric and Correction
keys as well as the Counter window.
[99]
[99] scanner operator panel
The keys
With the keys on the scanner operator panel you can make a number of settings for
the Océ TDS700.
The following keys are available.
1
1 2
3
4
5
6 7
8
9 0
C
3
To Next Page
Loading...
