Oce TDS700 - Automatic logon

241
Automatic logon
Use Océ TDS700 Power Logic
®
controller Remote
Automatic logon
Introduction
The 'Automatic logon' option enables you to start an application automatically in the
indicated user mode.
How to enable automatic logon
[153]
[37]
Automatic logon is now enabled.
Step Action
1 Access Océ TDS700 Power Logic controller Remote.
From the 'Edit' menu, select 'Options'.
The 'Options' window appears.
2 Make sure that the Host name and Default system are configured correctly
otherwise you cannot connect to the controller.
3 Select the 'Enable automatic logon' checkbox.
4 From the drop-down box, select the user mode for the automatic logon.
5 Enter the password that corresponds to the selected user mode.
6 Click 'OK'.