58 Chapter 2 Use the Océ TDS700 to print a job
Print the system settings
Print the system settings
When to do
If you want to have a printed overview of the system settings.
Illustration
[16]
[16] Select the Print settings option
How to print the settings
1. Press the On-line key to put the system in off-line mode.
2. Press the key above the graphical display.
3. Use the Up/down key to scroll through the list with options.
4. Press the right selection key below the graphical display to go to the next step.
5. Follow the instructions on the printer operator panel.
6. When ready press the On-line key again to put the printer on-line again.
Result
The Océ TDS700 will print a report with the system settings of the Océ TDS700.
To Next Page
Loading...
