85
Print a job to the 'Scheduled jobs'
Print a job to the 'Scheduled jobs'
Purpose
As long as the job is in the 'Waiting jobs', the job is no printed. You need to send a
job to the 'Scheduled jobs' in order to print the job on the Océ TDS700.
Before you begin
Make sure you have sufficient permissions when you log on to the Océ TDS700
Power Logic
®
controller application.
■ 'Anonymous' - no permission, only viewing access
■ Repro operator - permission, editing and other actions are allowed
■ Key operator - permission, editing and other actions are allowed
■ System administrator - no permission, only viewing access
How to print a job to the 'Scheduled jobs'
1. Click 'Print jobs' in the vertical icon toolbar to access the 'Waiting jobs'.
2. Select the job(s) you want to print. You can select more than one job at a time.
3. Click 'Print' to send the job(s) to the 'Scheduled jobs'.
Result
The jobs are now added at the bottom of the 'Scheduled jobs' list. If you send the jobs
to the 'Scheduled jobs' one at a time, each job is added after the last job. If you select
more than one job, the complete selection is added to the 'Scheduled jobs' in the same
order as shown in the 'Waiting jobs' area.
To Next Page
Loading...
