94 Chapter 3 Use the Océ TDS700 flexible scanner
Use the scanner operator panel
Use the scanner operator panel
Introduction
Use the scanner operator panel to define the job settings. You can define the job
settings in two ways.
■ Use the left softkeys and the scroll wheel.
You can use this method if you prefer a general step by step method.
■ Use the scroll wheel and scroll-wheel key only.
You can use this method if you prefer a fast method.
Note that the scanner operator panel also uses icons to explain a setting. The
following illustration shows the scanner operator panel. For more information about
the keys on the scanner operator panel (see ‘Flexible scanner’ on page 387)
Illustration
[33]
[33] The operator panel of the Océ TDS700 scanner
1
2
3
4
5
6
7
8
9
0
To Next Page
Loading...
