255
Change the password
Change the password
Purpose
For security reasons it may be useful to periodically change the default passwords.
Before you begin
There are 4 user roles and a service access mode in which you can log on to the
system. The default passwords for the 4 user roles are listed here. It is advised to
change the passwords after the system is installed to avoid unauthorised use of the
system.
■ 'Anonymous' - no password necessary
■ Repro operator - RepOp
■ Key operator - KeyOp
■ System administrator - SysAdmin
How to change the password
1. Click the Log on menu option in the menu bar of the Océ TDS700 Power Logic
®
controller application. A secondary window appears.
2. The drop-down box displays a user role already. if necessary select another user role.
3. Click the 'Password' button.
4. A second window appears where you need to fill in the new password.
5. Click ok to close the window and accept the changes.
To Next Page
Loading...
