Oce TDS700 - Clear an original jam on the flexible scanner

348 Chapter 10 Maintain the Océ TDS700
Clear an original jam on the flexible scanner
Clear an original jam on the flexible scanner
Introduction
A red light at the scanner operator panel indicates that an original jam occurred.
How to remove a jammed original
1. Pull the top cover towards you and lift the top cover to open it.
[217]
[217] Open the top cover
2.
Remove the original.
3. Lift the top cover, turn the top cover towards you and push the top cover backwards
until you hear or feel a click.
Result
The green light at the scanner operator panel is on.