370 Chapter 10 Maintain the Océ TDS700
Introduction to problem solving
Solve problems on the printer
Introduction to problem solving
Introduction
When an error occurs, the display indicates the following information.
■ The nature of the problem.
■ The location of the problem.
■ The solution to the problem.
An attention light will flash above the printer operator panel when operator attention
is required.
A buzzer can be activated to alert the operator whenever operator intervention is
needed (see ‘Activate the buzzer’ on page 64).
Normally the paper moves through the system without problems. On the graphic
display a cover or door indicates in which part of the system the paper has stopped.
The display guides you through a sequence of steps to correct the problem. If a jam
occurs in more than one location, the display will continue to instruct you until all
jammed paper has been removed. If you corrected the error the display gives
instruction how to continue the job.
Stickers on some parts of the system indicate which green handles, green knobs,
green bars and covers, etc. you have to lift, press or open to remove any jammed
paper.
To Next Page
Loading...
