Oce TDS700 - Delete a Job in the Printed Jobs

89
Delete a job in the 'Printed jobs'
Delete a job in the 'Printed jobs'
Introduction
The jobs that are printed leave the 'Scheduled jobs' area and are stored in the 'Printed
jobs' area (if this area is enabled). If you do not use the jobs in the 'Printed jobs' you
can wait until their job lifetime expires and the jobs are automatically deleted. You
can also delete the jobs manually.
Purpose
Clean up the 'Printed jobs'.
Before you begin
Make sure you have sufficient permissions when you log on to the Océ TDS700
Power Logic
®
controller application.
■ 'Anonymous' - no permission, only viewing access
■ Repro operator - permission, editing and other actions are allowed
■ Key operator - permission, editing and other actions are allowed
■ System administrator - no permission, only viewing access
Note: Use the functions in the 'Waiting jobs' toolbar or right-click when you have
selected the job.
How to delete a job in the 'Printed jobs'
1. Click 'Print jobs' in the vertical icon toolbar to access the 'Printed jobs'.
2. Select the job you want to delete in the 'Printed jobs'.
3. Click 'Delete' in the tool bar of the 'Waiting jobs' to permanently delete the job.
Result
The job is now deleted. You can not recover this job. The delete action is irreversible.