Oce TDS700 - Handle errors at the reinforcement unit

332 Chapter 9 The finishing options
Clear a tape jam in the reinforcement unit
Handle errors at the reinforcement unit
Clear a tape jam in the reinforcement unit
Introduction
When a tape jam occurs in the reinforcement unit, an error message appears on the
display.
Illustration
[205]
[205] Location of the reinforcement unit
Clear a tape jam
1. Open the front door of the reinforcement unit
[206]
[206] Opening the front door of the reinforcement unit
2. Turn the two guide plates away from the pin roller and lock the two guide plates into
their open position.