141
Manage scan destinations in the 'Scan jobs' workspace
6. Enter the system name of the remote location and click 'Find' to identify the system
location easily.
7. Enter the path name. This is the name of the shared folder on your workstation. For
Windows NT
®
, Windows
®
2000 and XP, use the DOS name of the shared folder. For
Windows 95/98
®
use the folder name. This is case sensitive.
8. For access to the directory on the workstation through FTP, a user name and
password is set on the FTP server that runs on the workstation. Enter this user name
and this password in the required fields on the properties window.
9. Set the required file naming properties
10. Click Ok.
The Power Logic
®
controller application connects to the new FTP destination. The
'Scan jobs' view area then shows the contents of the new FTP destination.
Note: You can create a maximum number of 10 destinations. Names in Japanese
can only be entered for remote destinations in SMB.
Lock a scan destination
1. Select a scan destination.
2. Open the ‘File’ menu and select 'Properties'.
3. Check the ‘Locked’ check box.
4. Click Ok to accept the scan destination settings.
The destination properties are now locked.
Note: This option is only available if you are logged on as a key operator.
Unlock a scan destination
1. Select a scan destination.
2. Open the ‘File’ menu and select 'Properties'.
3. Uncheck the ‘Locked’ check box.
4. Click OK to accept the destination settings.
The destination properties are now unlocked.
Note: This option is only available if you are logged on as a key operator.
To Next Page
Loading...
