411
Available media sizes
Media sizes in the cut sheetfeeders
DIN range
[94]
8,5 Inch range
[95]
9 Inch range
[96]
If a Océ TDS700 configuration has three sheetfeeders (see ‘Overview of the Océ
TDS700 system’ on page 382), the sheetfeeder in the lowest position cannot handle
the marked small sheet sizes. The 1st and 2nd sheetfeeder can handle all sheet sizes,
independent of the configuration.
Media Width [mm] Length [mm]
A4 portrait* 210 297
A3 landscape* 420 297
A3 portrait 297 420
A2 landscape 594 420
Media Width [inch] Length [inch]
8,5 portrait* 8,5 11
11 landscape* 17 11
11 portrait 11 17
17 landscape 22 17
Media Width [inch] Length [inch]
9 portrait* 9 12
12 landscape* 18 12
18 portrait 12 18
24 landscape 24 18
To Next Page