Oce TDS700 - Page 96

96 Chapter 3 Use the Océ TDS700 flexible scanner
Use the scanner operator panel
There are several types of settings. The behaviour of the scanner operator panel and
the definition of a setting depends on the type of setting you selected. You can select
one of the following types of settings.
■ A setting that contains two values only, like 'On' or ' Off'.
Change the value of the setting with the scroll-wheel key to change the value of
the setting. The value and icon changes.
■ A setting that contains a list of values, like 'Lighter/darker'.
Open the setting with the scroll-wheel key.
Define the required value with the scroll wheel. The value and icon changes.
Close the setting with the scroll-wheel key.
■ A setting that contains a list of settings, like 'Media'.
Focus on a setting with the scroll wheel. The bold text of a value indicates the
focus of the scroll wheel. The icon changes.
Open the setting with the scroll-wheel key. The list of values appears.
Open the setting with the scroll-wheel key.
Define the required value with the scroll wheel. The value and icon changes.
Close the setting with the scroll-wheel key.
Note: You can enter a numeric value with the numeric keys. To enter a negative
numeric value, scroll to a negative value first and than enter the value with the
numeric keys.
6. Select 'Close' with the lower-scroll-wheel key.
7. Repeat from step 4 to define the next setting.
Note: Use the 'Defaults' option at the lower-left key to set all settings of the job
template to default.