8
Precautions for Correct Use
SYSDRIVE MX2 Series USER'S MANUAL (3G3MX2-Axxxx)
Precautions for Correct Use
Installation
 Mount the product vertically on a wall with the product's longer sides upright.
The material of the wall has to be nonflammable such as a metal plate.
Restart after Trip
 Do not come close to the machine when using the Restart During Momentary Power Interruption
function because the machine may abruptly start when stopped by an alarm.
 Be sure to confirm the RUN signal is turned off before resetting the alarm because the machine
may abruptly start.
Operation Stop Command
 Provide a separate emergency stop switch because the STOP key on the Digital Operator is valid
only when function settings are performed.
 When checking a signal during the power supply and the voltage is erroneously applied to the
control input terminals, the motor may start abruptly. Be sure to confirm safety before checking a
signal.
Maintenance and Parts Replacement
 The Inverter consists of many parts, and these parts must operate properly in order to make full
use of the designed functions of the Inverter. Among the electronic components, there are some
that require maintenance depending on their usage conditions. In order to keep the Inverter
operating normally over a long period of time, it is necessary to perform periodic inspections and
replace parts according to their service life.
Product Disposal
 Comply with the local ordinance and regulations when disposing of the product.
To Next Page
Loading...
Need help?
General