Omron SYSDRIVE MX2 SERIES - Function Mode Parameters

4-4
4-2 Function Mode
SYSDRIVE MX2 Series USER'S MANUAL (3G3MX2-Axxxx)
4
Parameter List
4-2 Function Mode
Parameter
No.
Function name Monitor or data range
Default
setting
Data can
be set
during
RUN
Data can
be
changed
during
RUN
Unit Page
F001
Output
Frequency
Setting
0.0
Starting frequency to maximum
frequency 1/2
0.0 to 100.0 (PID function enabled)
6.00 yes yes
Hz
%
5-15
F002
Acceleration
Time Setting 1
0.01 to 99.99
100.0 to 999.9
1000. to 3600.
10.00 yes yes s
5-24
F202
Acceleration
Time Setting 2
0.01 to 99.99
100.0 to 999.9
1000. to 3600.
10.00 yes yes s
F003
Deceleration
Time Setting 1
0.01 to 99.99
100.0 to 999.9
1000. to 3600.
10.00 yes yes s
F203
Deceleration
Time Setting 2
0.01 to 99.99
100.0 to 999.9
1000. to 3600.
10.00 yes yes s
F004
RUN Direction
Selection
00: Forward
01: Reverse
00 no no − 5-23