Omron SYSDRIVE MX2 SERIES User Manual

2-1
2-1 Installation
SYSDRIVE MX2 Series USER'S MANUAL (3G3MX2-Axxxx)
2
Design
2-1 Installation
Precautions for Safe Use
Installation and Storage
 Do not store or use the product in the following places.
 Locations subject to direct sunlight.
 Locations subject to ambient temperature exceeding the specifications.
 Locations subject to relative humidity exceeding the specifications.
 Locations subject to condensation due to severe temperature fluctuations.
 Locations subject to corrosive or flammable gases.
 Locations subject to exposure to combustibles.
 Locations subject to dust (especially iron dust) or salts.
 Locations subject to exposure to water, oil, or chemicals.
 Locations subject to shock or vibration.
Transportation, Installation, and Wiring
 Do not drop or apply any strong impact to the Inverter to avoid damage to the parts and/or
the Inverter.
 When transporting the Inverter, hold the fin, not the front cover or terminal block cover.
 Do not connect an AC power supply to the control I/O terminals. Doing so may cause damage
to the Inverter.
 Be sure to tighten the screws on the terminal block securely.Perform the wiring after installing
the Inverter.
 Do not connect any load other than the 3-phase induction motor to the output terminals (U/
T1, V/T2, W/T3) of the Inverter.
 Take appropriate and sufficient countermeasures when using the Inverter in the following
locations.Not doing so may result in damage to the Inverter.
 Locations subject to static electricity or other forms of noise.
 Locations subject to strong electromagnetic fields.
 Locations close to power supplies.
Main Circuit Power Supply
 Confirm that the rated input voltage of the Inverter matches the AC power supply voltage.

Omron SYSDRIVE MX2 SERIES Specifications

General

Brand	Omron
Model	SYSDRIVE MX2 SERIES
Category	Inverter
Language	English