Populating DIMMs in Single-Processor Systems for Optimal System Performance
The following table describes the proper order in which to populate DIMMs in a single-
processor system using the numbered callouts in the above figure, and the DIMM socket labels
(D0 through D11).
Population Order Processor/DIMM Slot
Populate black slots first in the following order: 1. P0/D7
2. P0/D4
3. P0/D9
4. P0/D2
5. P0/D11
6. P0/D0
After black slots have been populated, populate white
slots in the following order:
1. P0/D6
2. P0/D5
3. P0/D8
4. P0/D3
5. P0/D10
6. P0/D1
Servicing the DIMMs (CRU) 101
To Next Page
Loading...
