Oracle X7-2 Service Manual

Use the Oracle ILOM Web Interface for Immediate Shutdown
Related Information
■
“Use the On/Standby Button for Immediate Shutdown” on page 56
■
“Use the Oracle ILOM Web Interface for Immediate Shutdown” on page 58
Use the Oracle ILOM Web Interface for Immediate Shutdown
Caution - An immediate power down might corrupt system data, so only use this procedure to
power down the server after attempting the graceful power down procedure.
1.
Log in to the Oracle ILOM web interface using an Administrator account.
The Oracle ILOM web interface System Information page appears.
2.
In the left pane, click Host Management → Power Control, and select Immediate
Power Off in the Select Action list.
3.
Click Save, then click OK.
The server powers down immediately.
4.
Disconnect the power and data cables from the server.
See “Disconnect Cables From the Server” on page 58.
Caution -When the server is powered down, it enters Standby power mode In standby power
mode, power is still directed to the service processor and power supply fans. To completely
power off the server, you must disconnect the power cords from the power supplies.
Related Information
■
“Use the On/Standby Button for Immediate Shutdown” on page 56
■
“Power Down Server Gracefully Using the Oracle ILOM CLI” on page 54
■
“Power On the Server” on page 214
Disconnect Cables From the Server
Caution -The system supplies Standby power to the circuit boards when the power cords are
connected even when the system is powered off.
1.
Label all cables connected to the server.
58 Oracle Server X7-2 Service Manual • October 2017

Oracle X7-2 Specifications

General

Processor	Intel Xeon Scalable processors
Number of Processors	1 or 2
Memory	Up to 1.5 TB DDR4
Memory Slots	24 DIMM slots
Form Factor	2U Rackmount
Storage Bays	8 x 2.5-inch
CPU Socket	Socket P (LGA 3647)
Power Supply	Redundant hot-swappable power supplies