Oracle X7-2 - Install an Internal USB Flash Drive

Install an Internal USB Flash Drive
b.
Extend the server to the maintenance position.
See “Extend the Server to the Maintenance Position” on page 59.
c.
Attach an antistatic wrist strap to your wrist and then to a metal area on the
chassis.
See “Take Antistatic Measures” on page 61.
d.
Remove the server top cover.
See “Remove the Server Top Cover” on page 62.
2.
Grasp the USB flash drive and pull it out of the internal USB port.
Related Information
■
“Remove an Internal USB Flash Drive” on page 93
Install an Internal USB Flash Drive
1.
Unpack the replacement USB flash drive.
94 Oracle Server X7-2 Service Manual • October 2017