Oracle X7-2 - Page 95

Install an Internal USB Flash Drive
2.
Insert the USB flash drive into the internal USB port.
3.
Return the server to operation.
a.
Install the server top cover.
See “Install the Server Top Cover” on page 210.
b.
Return the server to the normal rack position.
See “Return the Server to the Normal Rack Position” on page 212.
c.
Reconnect the power cords to the server power supplies and reconnect the
data cables.
See “Reconnect Data Cables and Power Cords” on page 214.
d.
Power on the server.
See “Power On the Server” on page 214.
Verify that the power supply AC OK LED is lit.
Related Information
■
“Install an Internal USB Flash Drive” on page 94
Servicing an Internal USB Flash Drive (CRU) 95