Oracle X7-2 Service Manual

About the Oracle Server X7-2
These sections describe the controls, connectors, status indicators, system components, and
replaceable components of the server:
■
“Product Description” on page 15
■
“About Controls and Connectors” on page 16
■
“About System Components” on page 19
Note - Always update the server with the latest firmware, drivers, and other hardware-related
software by downloading the latest software release package when you first receive the server,
and for every new software release. For information about the software release packages and
how to download the software, refer to “Getting Firmware and Software” in Oracle Servers
X7-2 and X7-2L Installation Guide.
Product Description
The Oracle Server X7-2 is an enterprise-class, one rack unit (1U) server. It supports the
following components:
■
Up to two Intel processors. Processors with the following capabilities are supported:
■
Intel Xeon 8160, 24-core, 2.1 GHz, 150W processors
■
Intel Xeon 6140, 18-core, 2.3 GHz, 140W processors
■
Intel Xeon 6128, 6-core, 3.4 GHz, 115W processors
■
Intel Xeon 4114, 10-core, 2.0-2.2 GHz, 85W processors
■
Up to 12 DDR4 DIMMs per processor for a maximum of 24 RDIMMs (16GB and 32GB)
and LRDIMMs (64GB) with speeds up to 2667 MT/sec are supported in dual-processor
systems.
■
Four PCIe Gen3 slots in dual-processor systems: one slot, slot 4, is dedicated to the internal
HBA. PCIe slot 1 is nonfunctional in single-processor systems.
■
Storage drive configurations can comprise both hard disk drives (HDDs) or solid state disk
drives (SSDs). Configurations include:
About the Oracle Server X7-2 15

Oracle X7-2 Specifications

General

Processor	Intel Xeon Scalable processors
Number of Processors	1 or 2
Memory	Up to 1.5 TB DDR4
Memory Slots	24 DIMM slots
Form Factor	2U Rackmount
Storage Bays	8 x 2.5-inch
CPU Socket	Socket P (LGA 3647)
Power Supply	Redundant hot-swappable power supplies