Oracle X7-2 Service Manual

Monitoring Components and Identifying SNMP
Messages
This section includes information about monitoring components and identifying SNMP
messages for the Oracle Server X7-2.
■
“Monitoring Component Health and Faults Using Oracle ILOM” on page 283
■
“Monitoring System Components” on page 284
■
“Identifying SNMP Trap Messages” on page 294
Related Information
■
Oracle Integrated Lights Out Manager (ILOM) 4.0 Documentation Library at: http://www.
oracle.com/goto/ilom/docs
Monitoring Component Health and Faults Using Oracle
ILOM
The Oracle ILOM 4.0 interfaces provide easy-to-view information about the health status of
system components. From the Oracle ILOM web interface or in the Oracle ILOM command-
line interface (CLI), you can collect system-specific information about the server, determine the
health state of discrete components, and view any open problems on the server. Oracle ILOM
automatically detects system hardware faults and environmental conditions on the server. If a
problem occurs on the server, Oracle ILOM will automatically do the following:
■
Illuminate the Fault-Service Required LED status indicator on the server front and back
panels.
■
Identify the faulted component in the Open Problems table.
■
Record system information about the faulted component or condition in the event log.
For further information about administering open problems that are detected and reported by
Oracle ILOM, refer to “Administering Open Problems” in the Oracle ILOM Administrator's
Monitoring Components and Identifying SNMP Messages 283

Oracle X7-2 Specifications

General

Processor	Intel Xeon Scalable processors
Number of Processors	1 or 2
Memory	Up to 1.5 TB DDR4
Memory Slots	24 DIMM slots
Form Factor	2U Rackmount
Storage Bays	8 x 2.5-inch
CPU Socket	Socket P (LGA 3647)
Power Supply	Redundant hot-swappable power supplies