Oracle X7-2 - Page 132

Install an M.2 Flash SSD
d.
Using your fingers, push down on the end of the card containing the plastic
retainer clip until the M.2 flash SSD snaps into place on the mezzanine [2].
You will hear an audible click when the M.2 flash SSD is secured to the mezzanine.
3.
Repeat Step 2 to install the second M.2 flash SSD on to the opposite side of the
M.2 mezzanine.
4.
Perform the steps to install the M.2 mezzanine with the replacement M.2 flash
SSDs on to the PCIe riser.
See “Install an M.2 Mezzanine” on page 129.
Related Information
■
“Remove an M.2 Flash SSD” on page 130
132 Oracle Server X7-2 Service Manual • October 2017