Oracle X7-2 Service Manual

Configure I/O Resource Allocation
4.
On the Add In Cards screen, select the slot in which you want to configure the
card and press Enter.
5.
On the IO resource allocation screen for that card, select IO Enable and press
Enter. Do one of the following:
■
Select Enabled to enable I/O resource allocation for the I/O card.
■
Select Disabled to disable I/O resource allocation for the I/O card.
6.
Press the F10 key to save the changes and exit the BIOS Setup Utility.
Related Information
■
“Access BIOS Setup Utility Menus” on page 225
■
“BIOS Setup Utility Menus” on page 224
■
“Exit BIOS Setup Utility” on page 251
Setting Up BIOS Configuration Parameters 239

Oracle X7-2 Specifications

General

Processor	Intel Xeon Scalable processors
Number of Processors	1 or 2
Memory	Up to 1.5 TB DDR4
Memory Slots	24 DIMM slots
Form Factor	2U Rackmount
Storage Bays	8 x 2.5-inch
CPU Socket	Socket P (LGA 3647)
Power Supply	Redundant hot-swappable power supplies