Oracle X7-2 - Page 248

Configure UEFI Secure Boot
d.
To save all Secure Boot policy variables, select Save all Secure Boot
variables and press Enter.
e.
On the Select a File System screen, select the file system where you want to
save the EFI file and press Enter.
The Secure Boot policy variables are saved to the root folder in the target file system.
8.
Press the F10 key to save the changes and exit the BIOS Setup Utility.
Related Information
■
“Access BIOS Setup Utility Menus” on page 225
■
“BIOS Setup Utility Menus” on page 224
■
“UEFI Secure Boot” on page 229
■
“Exit BIOS Setup Utility” on page 251
248 Oracle Server X7-2 Service Manual • October 2017