Polaris 2012 RANGER RZR 570 INTL User Manual

6.22
CLUTCHING
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
3. Place the clutch into the Universal Clutch Compressor
Tool PN PU- 50518. App ly an d ho ld do wnward
pressure on th e ou ter spr ing r etainer. Car efully
remove the snap rin g. Reme mber the ou ter spring
retainer contains strong spring pressure.
NOTE: Spring is c ompression only a nd h as no
torsi
onal wind.
4. With the snap ring (A) removed and spring pressure
r
elieved, re move the outer sprin g r etainer ( B),
compression spring (C), spacer (D), and inner spring
retainer (E).
5. Separate the two clutch sheaves.
6. Inspect the helix on the moveable sheave.
7. Remove the inne r spr ing retainer from the inn er
shea
ve. Inspect for wear and replace as needed.
Remove Snap Ring
Outer Spring Retainer
A
B
C
E
D
C
B
D
E
Inspect for Abnormal Wear
Inspect for Abnormal Wear

Polaris 2012 RANGER RZR 570 INTL Specifications

General

Brand	Polaris
Model	2012 RANGER RZR 570 INTL
Category	Offroad Vehicle
Language	English