3.29
ENGINE / COOLING SYSTEM
3
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
18. Remove t he ( 8) fa steners securing t he ( 2) b olt in
braces to the veh icle main fra me. Ma neuver the
braces for engine removal clearance. Note the routing
of the transmission breather hose and wire harness.
19. Remove (+) positive cable from the starter motor.
20. If desired, remov e the re maining s
tarter motor bolt
and remove the starter motor from the engine.
21. Remove (-) negative cable from the starter mounting
bo
lt.
22. Loosen the hose clamp (F) securing the throttle body
to
the air box. L ift air box up and rea rward a s an
assembly to disengage it from the throttle body.
23. Loosen the hose clamp (G) securing the throttle body
to
the engine intake boot. Remove throttle body from
the engine and wrap it with a clean shop towel. Place
throttle body on the left-hand side frame rail area.
IMPORTANT: Be sure dirt and debris do not enter the
e
ngine, a ir box or t hrottle bod y. Use clean sho p
towels to plug engine and air box intake holes.
24. Disconnect the upper en gine coo lant h ose ( H),
byp
ass hose (I) and ECT (J) harness connector.
To Next Page
Loading...
Need help?
General
