Tracks and Track Groups : Automation Tracks
5 - 108
All automatable functions can be displayed. Fader Gain and Mute can be selected directly while other functions
are grouped logically into sub-menus. Clicking on All... at the bottom of the list opens the Select Displayed
Automation Track dialog:
All automatable parameters for the entire Project are shown in a tree.
Hide Empty Tracks When ticked only Tracks with existing Automation Date will be present in the tree.
Only connected strip / bus When ticked only Strips and Buses connected are shown.
Display the selection in an extra automation sub-track When ticked a new Automation Sub-Track is created
to contain the automation curve for the selected parameter when the OK button is
clicked.
OK Confirms selection and closes the dialog
Cancel Cancels the selection and closes the dialog.
The selected parameter curve is displayed in a new Automation Sub-track below the current normal
Track.
The main button in the Automation Sub-track Header pops up the list of automatable parameters for the Track.
Selecting More... opens the Select Displayed Automation Track dialog with access to every automatable
parameter in the Project. The smaller [+] and [-] buttons on the right of the main button create a new Automation
Sub-track and delete the current one, respectively. The icon to the right indicates the number of audio channels
controlled by the automation in the Sub-track.
Select Displayed Automation Track dialog
Automation Sub-track Header
To Next Page
Loading...